Nortel CC MIS User Manual page 278

CC MIS
CC MIS
System Log Messages
CUST_INFO access failure (partition=xxxx; rc=xxxx)
Unable to access record in the CUST_INFO table. (ACtion Code: B)
Cannot start partition xxxx in SETUP mode
Cannot start a partition in SETUP mode. (Action Code: AI)
DBSTORAGE table access failure (rc = xxxx)
Unable to access record in the DBSTORAGE table. (Action Code: B)
DBSTORAGE table not initialized for partition xxxx
The DBSTORAGE table is not initialized for the specified partition. (Action Code: B)
LINK_DEF table access failure (linkNum=xxxx; rc=xxxx)
Unable to access record in the LINK_DEF table. (Action Code: B)
Link number xxxx not found
The specified link number was not found. (Action Code: B)
Live type link required to start partition xxxx in product mode
You must have a live link to start a partition in product mode. (Action Code: AI)
No more partitions using a live link may be started (max = xxxx)
The maximum number of live partitions has already been reached. (Action Code: AI)
No subpool name defined for partition xxxx
There is no subpool name defined for the specified partition. (Action Code: AI)
No subpool password defined for partition xxxx
There is no subpool password defined for the specified partition. (Action Code: AI)
STOREPARMS table access failure (custID = xxxx, rc = xxxx)
Unable to access record in the STOREPARMS table. (Action Code: B)
Simulator type link required to start partition xxxx in training mode
You must have a simulator link to start a partition in training mode. (Action Code: AI)
invalid partition mode (partition=xxxx; mode=xxxx)
The partition has an invalid mode. (Action Code: B)
no disk selected for partition xxxx
There is no disk selected for the specified partition. (Action Code: B)
no link selected for partition xxxx
There is no link selected for the specified partition. (Action Code: B)
B-38
Release 5.2
297-2671-545