Release 5.2
CC MIS Maintenance Guide
X.25 Diagnostics
The X.25 Diagnostics screen shows the status of the selected X.25
link. (Links are selected from the Options menu using the Options
key.) The figure below shows the X.25 screen with the commands
available on the Commands menu.
Figure 9.22 CC MIS X.25 Diagnostics screen (with Commands menu)
Checking an X.25 link
The Check X.25 Link command allows you to see if the X.25 link is
operational. The system sends a call packet across the specified X.25
link and reports any problems that occur. The system displays any er-
ror messages.
Perform the steps below to check an X.25 link.
Step 9-21: Checking an X.25 link
1. Access the Diagnostics screen.
2. Enter x to select X.25 Diagnostics.
The X.25 Diagnostics screen is displayed.
3. Select the X.25 device to be checked using the [Options] key
4. Press the Commands function key.
The system displays the Commands menu.
5. Select the Check option and press <Return>.
CC MIS
CC MIS
9-37