Figure 9.10 Cpu Utilization Status Screen - Nortel CC MIS User Manual

Release 5.2
CC MIS Maintenance Guide
CPU utilization status
The CPU Utilization option is selected from the Commands menu.
The system monitor screen is redrawn to display CPU Utilization sta-
tus.

Figure 9.10 CPU Utilization Status screen

The table below describes the CPU Utilization Status screen fields.
Table 9-6: CPU Utilization status fields
Parameter
PROGRAM NAME
SERVICE ID
KBYTES
CPU TIME
CC MIS
CC MIS
Description
The name of the program.
The ID assigned to each program. For-
mat is <partition ID>.<process ID>.
Partition ID 0 is reserved for the base
partition. This column will be blank
for transient programs that have not
started yet.
The amount of memory in kilobytes
currently used by the program. This
number includes attached shared
memory, so the total number of
KBYTES can be greater than the total
number of kilobytes used by all pro-
grams in this list.
Total CPU time used by the program
since it was started.
9-23