Terminal Server Configuration - Nortel CC MIS User Manual

Configuring the CC MIS application

Terminal server configuration

You can use the Terminal Server Configuration screen (see Figure 33) to
specify LAN-based terminal servers that are available for CC MIS.
Figure 33:
Perform the steps in Procedure 13 to add and configure a terminal server.
Procedure 13:
1 Access the Maintenance and Administration main menu.
2 Type c to access the Configuration main menu.
The system displays the Configuration main menu (see Figure 25 on
page 134).
3 Select Get Access Updates Rights to switch to Updates Allowed mode.
4 Select Terminal Server Configuration.
The Terminal Server Configuration screen appears (see Figure 34 on
page 149).
5 To add a new terminal server, press the Add function key.
148
Terminal Server Configuration screen
Adding and configuring a terminal server
Call Center Management Information System
Standard 2.0