Scheduler Messages - Nortel CC MIS User Manual

Release 5.2

SCHEDULER Messages

Introduction
This section contains error messages generated by the SCHEDULER process of the CC MIS product. The Mainte-
nance process writes the messages to their 'Standard Error' device The error messages may contain [XX] and/or
'YYYY' which denote any numeric and/or string, respectively.
This section lists only those messages which are unique to the SCHEDULER Process. Messages listed in STAN-
DARD ERROR MESSAGES on page 1 may also be generated by this process.
Warning Messages
This section lists the warning messages that may be generated by Scheduler. These messages usually indicate an
unusual condition that can be appropriately handled by the process, and which does not prevent the process from con-
tinuing execution.
No response from CCLINK
Scheduler timed out trying to run a change order. (Action Code: R)
Fatal Error Messages
Fatal error messages are generated by the Scheduler process in response to conditions which prevent the process from
continuing normal execution. This section lists these error messages.
Pipe stat failure - pipe: yyyy
Scheduler was unable to determine the status of the pipe. (Action Code: R)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-79