Nortel CC MIS User Manual page 296

CC MIS
CC MIS
System Log Messages
Error from sigaction() while setting SIG_IGN of SIGPIPE
Error trying to set ignore option on SIGPIPE signal. (Action Code: B)
Error locking lock file
An error occurred trying to open the lock file. (Action Code: B)
Error opening lock file
An error occurred trying to open the lock file. (Action Code: B)
Error reading ptn_moving file
An error occurred trying to determine if a partition is moving. (Action Code: B)
Error updating configuration database.
An error occurred trying to update the configuration database. (Action Code: B)
Error adding partition.
Error adding a partition to the system. (Action Code: B)
Error changing mode of partition.
Error changing the mode of a partition. (Action Code: B)
Operation failed.
An error occurred while trying to update the switch links. (Action Code: B)
Unable to read customer options file.
An error occurred trying to read the customer options file. (Action Code: B)
Unable to open yyyy file.
An error occurred trying to open the specified file. (Action Code: B)
Unable to read yyyy file.
An error occurred trying to read from the specified file. (Action Code: B)
Error changing runstate for partition xxxx
An error occurred changing the state of the specified partition. (Action Code: B)
Error disabling all changes.
An error occurred trying to disable changes to all partitions. (Action Code: B)
Error enabling all changes.
An error occurred trying to enable changes to all partitions
Error getting runstate for partition xx
An error occurred determining the state of the specified partition. (Action Code: B)
B-56
Release 5.2
297-2671-545