Nortel CC MIS User Manual page 321

Release 5.2
Invalid table name - name: xxxxx
A database operation was attempted on a table name that is unknown to the database server. The name of this
table is given in the "xxxxx" field. (Action Code: B)
Invalid table name in dblimits file on line: xx
A limit specification for an unknown database table was found on line "xx" of the database limits file. (Action
Code: B)
Missing field in dblimits file on line: xx
An incomplete limit specification was found on line "xx" of the database limits file. (Action Code: B)
Too many languages selected
The database server found that there were more than three languages enabled on the system. An excess languages
have been automatically disabled. (Action Code: B)
Unable to lock definitions database: xxxxx
The database server was unable to get an exclusive lock on the definitions database for the reason indicated in the
"xxxxx" field. (Action Code: B)
Unrecognized database command received - type: xx
The database server received an invalid message type from a client program. The invalid message type is given in
the "xx" field. (Action Code: B)
Fatal Error Messages
Fatal error messages are generated by the Definitions Database Server process in response to conditions which pre-
vent the process from continuing normal execution. This section lists these error messages.
No Standard/Custom designation specified for table xx
The database schema does not indicate either a standard or a custom component in the database for the table
specified by "xx". (Action Code: B)
Unable to determine current language selections
The database server failed to determine which languages are enabled in the system. (Action Code: A)
Unable to determine supported languages
The database server failed to determine what languages are supported on the system. (Action Code: A)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-81