Release 5.2
CC MIS Maintenance Guide
Cancel X.25 link check
The cancel command cancels the link checking of an X.25 link.
Perform the steps below to cancel the X.25 link checking.
Step 9-24: Cancelling an X.25 link
1. Access the X.25 Diagnostics screen.
2. Press the Commands function key.
The system displays the Commands menu.
3. Select the Cancel option and press <Return>.
Initializing an X.25 link
The Initialize command initializes the X.25 card associated with an
X.25 device.
On 88K-based platforms this command initializes
all of the devices (ports) on the affected card, not
Note:
just the selected device.
On the PowerPC this command initializes only the
selected device - not the entire card.
check
CC MIS
CC MIS
9-39