Release 5.2
This command changes
your configuration
and shuts down your
system.
It is highly recommended
that it be used only by
trained system
administrators.
CC MIS Maintenance Guide
Changing Time Zone settings
Selecting the Changing Time Zone command displays a screen that al-
lows you to specify new time zone setting. The warning message
shown below is displayed to allow you to abort the action prior to
making any changes to the configuration.
Figure 3.8 Time Zone
Typing "Y" and pressing <Return> results in the actions listed in the
screen being performed. To abort this operation type "N" and press
<Return>.
CC MIS
CC MIS
13-5