Nortel CC MIS User Manual page 297

Release 5.2
Unable to get operation result from CfgMgr
Unsuccessful in receiving a response from the Configuration Manager. (Action Code: B)
Error getting partition runstate.
An error occurred trying to determine the state of a partition. (Action Code: B)
Error starting partition(s).
An error occurred trying to start the partition. (Action Code: B)
Error stopping partition(s).
An error occurred trying to stop the partition. (Action Code: B)
Operation successful.
Operation requested was performed successfully. (Action Code: J)
Operation failed.
Operation requested failed. (Action Code: B)
Changes disabled on a partition basis.
Changes are disabled for a particular partition. (Action Code: J)
Partitions in SETUP mode may not be started.
Trying to start a partition in SETUP mode failed. (Action Code: AI)
A SIMULATOR type link is required for this operation.
Operation requires a simulator link. (Action Code: AI)
A LIVE type link is required for this operation.
Operation requires a live link. (Action Code: AI)
Database access failure occurred.
Error accessing database. (Action Code: B)
An internal system error occurred.
Internal system error. (Action Code: B)
Partition ID out of valid range.
An operation was requested for a partition ID that is out of range. (Action Code: B)
No disk selected for this partition's data.
The partition has no disk defined. (Action Code: AI)
Database not properly initialized.
The database is not properly initialized. (Action Code: B)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-57