Informational Messages - Nortel CC MIS User Manual

CC MIS
CC MIS
System Log Messages
lan clients table size consistency error
There is an inconsistency in the size of the lan clients table. (Action Code: B)
link table size consistency error
There is an inconsistency in the size of the link table. (Action Code: B)
Caught SIGCHLD from death of unknown process (PID = xxxx)
The SIGCHLD signal was received from the death of an unknown process. (Action Code: B)
Could not create ager signal file "yyyy"
Error trying to create the ager signal file. (Action Code: B)
Could not make directory "yyyy"
Error trying to create the specified directory. (Action Code: B)
More than xxxx wallboards defined on port xxxx
There are more than the specified number of wallboards defined on the port. (Action Code: B)
Re-initalization response error occurred for link xxxx
A re-initialization response error occurred for the specified link. (Action Code: B)
SIGTERM: process terminated
The SIGTERM signal was received. (Action Code: J)
Unable to connect to link xxxx
Error trying to connect to the specified link. (Action Code: B)
cfgdb: error xxxx reading yyyy table
An error occurred trying to read the specified table. (Action Code: B)
non-implemented error message class (xxxx)
An unrecognized error return value was received. (Action Code: B)
Unknown hard ID (xxxx) received on wallboard commands pipe
An unknown wallboard hard ID was received. (Action Code: B)

Informational Messages

The following messages do not actually indicate an error condition but are used as notification of significant events
which occur as part of normal operation.
caught SIGUSR1: updating internal state tables
Received the SIGUSR1 signal after a backup occurred indicating that the internal state tables will be updated.
B-42
Release 5.2
297-2671-545