Partition Configuration Options; Serial Terminals; Table 7-2: Partition Configuration Options - Nortel CC MIS User Manual

CC MIS
7-4
Table 7-1: Partition configuration function commands
Command
F9=>>
Add Partition
Delete Partition
Validate Partition

Partition configuration options

The following options are available using the Configuration Options
soft key. These must be completed in the order listed below:

Table 7-2: Partition configuration options

Option
Connection Parameters
Partition Options
Disk Allocation
Storage Calculator

Serial Terminals

LAN Terminals
Printers
Wallboards
Master Privilege
Definition
Function
Displays the Add Partition, Delete
Partition, and Validate Parathion com-
mands.
Displays a pop-up area to specify the
name of the partition to be added.
Deletes the partition and all of its asso-
ciated resources from the system.
Displays a message in the lower por-
tion of the screen indicating whether
the partition is valid for the current
mode/state.
Function
Displays the Connection Parameters
screen.
Displays the Partition Options screen.
Displays the Disk Allocation screen.
Displays the Storage
screen.
Displays the Serial Terminals Config-
uration screen.
Displays the LAN Terminals screen.
Displays Printer setup screen.
Displays the Wallboard setup screen.
Displays the Master Privilege Defini-
tion screen.
Release 5.2
Calculator
297-2671-545