Cclink Messages - Nortel CC MIS User Manual

CC MIS
CC MIS
System Log Messages

CCLINK Messages

Introduction
This section lists the error/warning messages that may be generated by CCLINK. These messages usually indicate an
unusual condition that has occurred within CC MIS software.
Warning Error Messages
This section lists the warning messages that may be generated by the CCLINK process. These messages usually indi-
cate an unusual condition that can be appropriately handled by the CCLINK process, and which does not prevent the
CCLINK process from continuing execution.
Invalid CC message received
CCLINK received an unknown message. (Action Code: B)
Configuration Control transaction log is corrupted.
The Configuration Control transaction log has become corrupted. (Action Code: B)
Switch connection aborted
The switch aborted it's connection. (Action Code: B)
Switch connection has aborted; retrying...
The switch has aborted its connection, CCLink is attempting to reconnect. (Action Code: B)
Unable to send LM command to switch
The switch did not accept the load management command. (Action Code: B)
Fatal Error Messages
Fatal error messages are generated by CCLINK in response to conditions which prevent the process from continuing
normal execution. This section lists these error messages.
Subpool yyyy on link nnnn does not exist
The subpool yyyy does not exist on link nnnn. (Action Code: H)
B-30
Release 5.2
297-2671-545