CC MIS
Press the F9 function key
to view the Add Partition,
Delete Partition, and
Validate Partition
commands.
7-2
To set up a partition, you first configure the system and define a sim-
ulator or live link (refer to Chapter 6), add a partition, set a size limit
and disk number (Disk Allocation), set data storage parameters (Stor-
age Calculator) and select a link number, subpool name, and password
(Connection Parameters).
The functions that are accessed through the Partition Configuration
screen include:
•
adding and deleting a partition
•
partition options
•
disk allocation
•
storage calculator
•
configuring a serial terminals
•
configuring printers
•
configuring wallboards
•
configuring LAN terminals
•
setting master privilege level and overrides
The partition configuration screen is shown in Figure 7-2.
Figure 7.2 Partition Configuration screen
Operating modes
Partitions are in one of four modes: setup, training, precut, or product.
The two states are running and stopped. The default mode and state of
a newly added partition is setup and stopped, respectively. Partitions
in setup cannot be running.
Release 5.2
297-2671-545