CC MIS
9-12
Printing a log
The Print command will print the selected log. If date and time filter-
ing or partition has been selected on the System log, then only those
messages within the entered date and time range will be printed. This
command will be available only if the maintenance printer has been
configured. Perform the steps below to print a log.
Step 9-9: Printing a log
1. Access the Diagnostics menu.
2. Enter l to display the Logs screen.
The Logs screen displays.
3. Press the Options function key.
The system displays the logs available for selection.
4. Select a log and press <Return>.
5. Press the Commands key.
The system displays the commands available for selection.
6. Select the Print command and press <Return>.
The system sends the selected log to the maintenance printer.
Cancelling the log printout
The Cancel Printing command cancels a previously requested log
printout. Perform the steps below to cancel a log printout.
Step 9-10: Cancelling a log printout
1. Access the Diagnostics menu.
2. Enter l to display the Logs screen.
The Logs screen displays.
3. Press the Commands key.
The system displays the commands available for selection.
4. Select the Cancel Printing command and press <Return>.
The system cancels the print job currently in progress.
Release 5.2
297-2671-545