Nortel CC MIS User Manual page 279

Release 5.2
partition number xxx out of range
The partition number is out of range. (Action Code: B)
Could not flush message buffer
An error occurred trying to flush the message buffer. (Action Code: B)
Could not make socket non-blocking
An error occurred trying to make the socket non-blocking. (Action Code: B)
Unrecognized message xxxx received from xxxx
An unrecognized message is received. (Action Code: B)
cfgmgr closing socket to cfgutil (cfgutil PID = xxxx)
An error occurred closing the socket to the cfgutil process. (Action Code: B)
completion acknowledgment fails (type = xxxx, sequence = xxxx)
An error occurred trying to send a completion acknowledgment. (Action Code: B)
lost connection with client
The connection was lost with the client. (Action Code: B)
message acknowledgment fails (type = xxxx, sequence = xxxx)
An error occurred trying to send a message acknowledgment. (Action Code: B)
socket read error
A socket read error occurred. (Action Code: B)
COMPORTS table access failure
Unable to access record in the COMPORTS table. (Action Code: B)
CUST_INFO table access failure (custID = xxxx; rc = xxxx)
Unable to access record in the CUST_INFO table. (Action Code: B)
Could not create ager signal file "yyyy"
An error occurred trying to create the ager signal file. (Action Code: B)
DBSTORAGE table access failure
Unable to access record in the DBSTORAGE table. (Action Code: B)
DISKS table access failure (diskNum = xxxx; rc = xxxx)
Unable to access record in the DISKS table. (Action Code: B)
Error xxxx deleting from DBSTORAGE table
The specified error occurred trying to delete a record from the DBSTORAGE table. (Action Code: B)
CC MIS Maintenance Guide
CC MIS
CC MIS
System Log Messages
B-39