Release 5.2
CC MIS Maintenance Guide
Viewing the translated link trace
The View Translated Link Trace command allows the user to view the
translated version of the Link Trace file, instead of the hexadecimal
file. When this command is chosen, the Message Translator Filter
screen appears. This screen allows the user to choose which messages
will be translated for viewing.
Perform the steps below to use the View Translated Link Trace com-
mand.
This command is available only if a Link Trace file
Note:
exists.
Step 9-15: Viewing a translated link
1. Access the Diagnostics menu.
2. Enter t to access the Link Trace screen.
The Link Trace screen displays.
3. Press vt and <Return>.
The system displays the Message Translator Filter screen.
4. Enter p to proceed with the view command.
The system displays the translated Link Trace file.
Using the Search function
The Search command allows you to search for a specific entry within
the link trace file.
Figure 9.18 Search function key
Pressing the Search function key causes the Search screen to be dis-
played. The Search screen is shown in the figure below.
trace file
CC MIS
CC MIS
9-31