Assigning Audio & Video Input Connectors; Section 3: Setup - Lexicon RV-8 User Manual

SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
the factory-default name of the selected input and close the
message. (Press the Menu
without restoring the factory-default name of the selected
input.)
3-6
SETUP
INPUTS INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
arrow to close the message
INPUT SETUP DVD1 INPUT SETUP
DVD1 DVD1 NAME
DVD2 DIGITAL IN
SAT ANALOG IN
VCR ANLG IN LVL
TV VIDEO IN
CD COMPONENT IN
TUNER 2-CH
PHONO D
DTS-ES DTS-ES L7
5.1a
MAIN ADVANCED
ZONE2 IN
ZONE2 ADVANCED
ASSIGNING AUDIO & VIDEO INPUT CONNECTORS
The RV-8 has eight configurable inputs, each of which can be
assigned to its eight digital audio, eight analog audio, the built-in
tuner, the phono input, five composite video, five S-video or three
component video input connectors. The table below lists the
INPUT SETUP menu parameters that can be used to assign audio
and video input connectors. The ANLG IN LVL parameter can be
used to adjust analog audio input levels for the selected input.
These parameters are highlighted on the INPUT SETUP menu
shown above.
Parameter Possible Settings
DIGITAL IN COAX-1 to 4, OPTICAL-1 to 4, NONE
ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8),
PHONO, TUNER, NONE
ANLG IN LVL AUTO, -18dB to +12dB
VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE
COMPONENT IN COMPONENT 1 to 3, VIDEO, NONE
DVD1
COAX-1
NONE
AUTO
S-VIDEO-1
1
L7 FILM
5.1 L7 FILM
FILM
5.1a FILM
DIGITAL
Lexicon