Specifications - Lexicon RV-8 User Manual

Appendix A

SPECIFICATIONS

Audio Input & Output Connectors
Analog Audio Inputs • 8 Stereo (RCA) or 5 stereo and one 5.1-channel or 2
stereo and two 5.1-channel connectors
Digital Audio Inputs • 4 S/PDIF coaxial (RCA) and 4 S/PDIF optical (TosLink)
connectors
• Coaxial and optical input connectors conform to IEC-
958, S/PDIF standards
• Accept 44.1, 48, 88.2, and 96kHz sample rates
• Accept 16-24 bits PCM audio, Dolby Digital, DTS,
DTS-ES, and DTS-96k discrete data formats
Main Zone Audio 8 Unbalanced (RCA) connectors for Front L/R, Center,
Outputs Sub, Side L/R and Rear L/R
• 1 Unbalanced (RCA, variable output level) stereo
Zone 2 Audio Outputs
connector
• 1 Unbalanced (RCA, fixed output level) stereo con-
nector
• 1 S/PDIF coaxial (RCA) connector and 1 optical
(Toslink) connector
Zone 3 Audio Outputs
1 Stereo (RCA, variable output level) connector
Headphone 1 Stereo (1/4-inch phone) connector
7 Channels, 2 channels assignable to Zone 2 or
Amplifier
Zone 3
Main Zone Audio Performance
A/D Conversion 24-bit, 96kHz, dual-bit ∆∑ architecture
24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture
D/A Conversion
20Hz to 20kHz, +0.1dB/-0.1dB, -0.25dB at 10Hz,
*Frequency Response
-0.5dB at 40kHz, reference 1kHz
Below 0.02%, 20Hz to 20kHz, 140Wrms all channels
*THD + Noise
driven
*Dynamic Range • 105dB minimum, 22kHz bandwidth, "A" weighted
• 102dB minimum, 22kHz bandwidth, unweighted
*
Combined measurements of preamplifier and power amplifier sections
A-2
Main Zone Audio Performance
*Signal-to-Noise Ratio • 105dB minimum, 22kHz bandwidth, "A" weighted
• 102dB minimum, 22kHz bandwidth, unweighted
200mVrms (2Vrms for maximum output level) at 0dB
Input Sensitivity
input gain
Input Impedance
100kΩ in parallel with 150pF
Preamp Output Level • 150mVrms typical, 6Vrms maximum (RCA connectors)
• Maximum value with full-scale input signal and volume
at +12dB
Preamp Output
500Ω in parallel with 150pF (RCA connectors)
Impedance
Zone 2 and Zone 3 Audio Performance
24-bit, 44.1 48, 88.2, 96kHz, multi-bit ∆∑
A/D Conversion
architecture (Zone 2 only)
D/A Conversion 24-bit, 44.1 to 192kHz, multi-bit ∆∑ architecture
10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
Frequency Response
reference 1kHz
THD + Noise
Below 0.005% at 1kHz, (1Vrms output level)
Dynamic Range 101dB minimum, 22kHz bandwidth
Signal-to-Noise Ratio 101dB minimum, 22kHz bandwidth
Input Sensitivity 200mVrms (4Vrms for maximum output level)
Input Impedance
100kΩ in parallel with 150pF
• 200mVrms typical, 4Vrms maximum
Preamp Output Level
• Maximum value with full-scale input signal and volume
at 0dB
Preamp Output
300Ω in parallel with 150pF
Impedance
Lexicon
(continued)