Lexicon RV-8 User Manual page 81

SETUP
DIGITAL BYPASS
INPUTS
SETUP DVD1 ZONE2 ADVANCED
Allows digital sources to bypass decoding for direct digital record-
ing. When ON is selected, the RV-8 passes digital input signals
directly to the Zone 2 digital audio output connectors, preserving
the original format of the input signal. This would be useful if you
want to send a multichannel-encoded signal to a second device for
decoding. When OFF is selected and the ZONE2 IN parameter is
set to DIGITAL, Dolby Digital and DTS sources will not be passed to
the Zone 2 digital audio outputs. When OFF is selected and a PCM
source is present, the RV-8 will send the PCM audio to the Zone 2
digital audio output connectors. If a Dolby Digital or DTS source is
present and the ZONE2 IN parameter is set to DMIX, a downmix
of the source will be sent to the Zone 2 digital audio output
connectors.
DIG OUT RATE
INPUT, 96kHz, 88.2kHz, 48kHz, 44.1kHz
ZONE2 ADVANCED
SETUP INPUTS DVD1
Controls the sample rate of analog input signals sent to the Zone 2
digital audio output connectors.
When a value is selected, the RV-8 runs the Zone 2 A/D converters
at the selected sample rate. It is recommended to set the DIG OUT
RATE parameter to the appropriate value when using a recording
format that operates on a single sample rate, such as CD-R format
(44.1kHz).
Note:
DIG OUT RATE only affects analog input signals. It
does not change the sample rate of digital input
signals, or downmixed signals.
3-28
RECORD
ON, OFF
SETUP
DIGITAL BYPASS
Prevents recording device feedback loops. When BLOCKED is
selected, the RV-8 blocks the Zone 2 audio output connectors to
prevent feedback loops. However, the RV-8 still passes video input
signals to the Zone 2 video output connectors. When ENABLED is
selected, the RV-8 passes audio and video input signals to the Zone
2 audio and video output connectors.
DIG OUT RATE
DVD1
ZONE2 ADVANCED
INPUTS
Lexicon
BLOCKED, ENABLED
RECORD