Installation Considerations - Lexicon RV-8 User Manual

Getting Started
• Five composite video input connectors
• Five S-video input connectors
• One component video output
• Four S-video outputs
• Five composite video outputs
• LOGIC7 decoding
• Dolby Digital Surround EX, Dolby Pro Logic II, and Dolby Pro
Logic decoding
• DTS 96/24, DTS-ES (discrete and matrix), and DTS neo:6
decoding
• THX Ultra2 and THX Surround EX decoding
• THX Ultra2 certification
• Flash memory software upgrade capabilities
• Two internal expansion slots for future developments
• RS-232 control
• Rear-panel IR input connector
• Two trigger output connectors
• Optional 19-inch rack-mount kit
• IR preprogrammed/learning remote control with LCD
display
1-4
PRODUCT REGISTRATION
Please register the RV-8 Receiver within 15 days of purchase. To do
so, register online at www.lexicon.com or complete and return the
product registration card attached to the back cover of this user
guide. Retain the sales receipt as proof of warranty coverage.

INSTALLATION CONSIDERATIONS

The RV-8 requires special care during installation to ensure optimal
performance. Pay particular attention to the bulleted items that
begin below and to other precautions that appear throughout this
user guide.
Do . . .
• Install the RV-8 on a solid, flat, level surface such as a table or
shelf. The RV-8 can also be installed in a standard 19-inch
equipment rack using an optional rack-mount kit available
from authorized Lexicon dealers.
• Select a dry, well-ventilated location out of direct sunlight.
Do Not . . .
• Install the RV-8 on a surface that is unstable or unable to
support all four of its feet, unless it is installed in an equipment
rack.
Before moving the RV-8, make sure it is powered off with the
CAUTION
rear-panel power switch. Then make sure the power cord is
unplugged from the wall outlet.
Lexicon