Lexicon RV-8 User Manual page 34

Basic Operation
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
Menu Parameters
(continued from page 2-15)
Parameter Drop-Down Menus
Selecting some menu parameters opens a drop-down menu that
contains a list of available parameter settings. For instance, select-
ing the DISPLAY SETUP menu CUSTOM NAME parameter (page
3-55) opens the drop-down menu shown below, which can be
used to select the ON or OFF setting.
To select the desired setting on a parameter drop-down menu:
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY
CUSTOM NAME CUSTOM NAME
EDIT CUSTOM NAME
1. When the drop-down menu opens, press the remote control
Menu and arrows to scroll upward and downward
through the complete list of available settings. The current
setting appears to the right of the parameter name on the on-
screen and front-panel displays.
2. When the desired setting appears beneath the parameter
name, press the Menu
the drop-down menu.
2-16
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
ON
OFF
OFF
OFF OFF
arrow to select the setting and close
Horizontal Bar Graphs
Selecting some menu parameters opens a horizontal bar graph,
which indicates the position at which the current parameter setting
falls within the entire parameter range. The current setting appears
at the right of the parameter name in the on-screen and front-
panel displays.
For instance, selecting the DISPLAY SETUP menu A/V SYNC DELAY
parameter opens the horizontal bar graph shown below, which can
be used to adjust the amount of audio delay.
DISPLAY SETUP
ON-SCREEN DISPLAY
FRONT PANEL DISPLAY
A/V SYNC DELAY A/V SYNC DELAY
CUSTOM NAME
EDIT CUSTOM NAME
To adjust a parameter setting with a horizontal bar graph:
1. When the horizontal bar graph appears, press the remote
control Menu and
setting in designated increments. The current setting appears
at the right of the parameter name in the on-screen and front-
panel displays.
2. When the desired adjustments have been made, press the
Menu arrow to select the setting and close the horizontal
bar graph.
Note:
Menu item selection instructions differ for certain
menus. These instances are noted throughout this
user guide.
OFF, 1 to 60ms
OFF OFF
OFF
arrows to increase and decrease the
Lexicon