Lexicon RV-8 User Manual page 55

SETUP
SETUP
Selecting the MAIN MENU SETUP option opens the SETUP menu as
shown below. SETUP menu option descriptions begin below and
continue throughout this section.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
INPUTS
SETUP INPUTS
Prompts the selection of the desired input (e.g., DVD1). Selecting
an input opens the corresponding INPUT SETUP menu, which can
be used to change input names, assign audio and video input
connectors, select preferred listening modes, and configure
advanced Main Zone and Zone 2 input settings. Refer to the next
page for more information.
SPEAKERS
SETUP SPEAKERS
Opens the SPEAKER SETUP menu, which can be used to configure
the Main Zone audio output connectors for the desired speaker
setup, to set speaker distances and to calibrate output levels. See
page 3-29 for more information.
3-2
SETUP
INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
I/O CONFIG
SETUP I/O CONFIG
Opens the I/O CONFIG menu, which can be used to configure the
analog audio input connectors as eight stereo connectors, five
stereo and one 5.1-channel connectors, or two stereo and two 5.1-
channel connectors. It can also be used to configure the amplifier
outputs. See page 3-48 for more information.
DISPLAYS
SETUP DISPLAYS
Opens the DISPLAY SETUP menu, which can be used to customize
the on-screen and front-panel displays, restore audio/video
synchronization, and create and activate a custom unit name. See
page 3-51 for more information.
VOLUME CONTROLS
SETUP VOLUME CONTROLS
Opens the VOLUME CONTROL SETUP menu, which can be used to
configure Main Zone, Mute, Zone 2, Zone 3 and Headphone
volume levels. See page 3-57 for more information.
TRIGGER
SETUP TRIGGER
Opens the TRIGGER SETUP menu, which can be used to configure
the trigger output connector labeled 1. See page 3-58 for more
information.
Lexicon