Assigning Audio And Video Input Connectors - Lexicon RV-8 User Manual

RV-8

ASSIGNING AUDIO and VIDEO INPUT CONNECTORS

The RV-8 has eight configurable inputs, each of which can be assigned to its eight digital audio, eight analog audio, the built-in tuner, the phono
input, five composite video, five S-Video or three component video input connectors.
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The table below indicates the INPUT SETUP menu parameters that
can be used to assign audio and video input connectors. The ANLG
IN LVL parameter can be used to adjust 2-channel analog audio input
levels for the selected input.
Parameter Possible Settings
DIGITAL IN COAX-1 to 4, OPTICAL-1 to 4, NONE
ANALOG IN ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8), PHONO,
TUNER, NONE, LIVE!
ANLG IN LVL AUTO, –18dB to +12dB
VIDEO IN COMPOSITE-1 to 5, S-VIDEO-1 to 5, NONE
COMPONENT IN COMPONENT-1 to 3, VIDEO, NONE
Note:
The digital audio input connectors are compatible with PCM (44.1, 48,
88.2 and 96kHz), Dolby Digital and DTS (-ES) sources. The digital audio
input connectors are not compatible with MPEG or MP3 sources.
SETUP INPUT SETUP
INPUTS DVD1
SPEAKERS DVD2
I/O CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER
CD
TUNER SETUP
TUNER
LOCK OPTIONS
PHONO
LIVE! CALIBRATION
POWER MANAGEMENT
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH FILM
D 5.1 FILM
FILM
5.1a
5.1a FILM
MIC LIVE! MED
MAIN ADVANCED
ZONE2 IN DIGITAL
ZONE2 ADVANCED
DIGITAL IN
COAX-1 TO 4, OPTICAL-1 TO 4, NONE
DVD1
SETUP INPUTS DIGITAL IN
Opens the DIGITAL IN menu, which is used to assign a digital audio
input connector for the selected input. The RV-8 has eight config-
urable inputs, each of which can be assigned to any of its eight digital
audio input connectors.
Please note the following:
• When no digital audio input connector is assigned, the RV-8 will
automatically set the MAIN ADV menu INPUT SELECT
parameter to ANALOG (see page 3-17).
• A digital audio input connector must be assigned when no
analog audio input connector is assigned. Refer to the next page
for information about assigning an analog audio input
connector.
Setup
DVD1 DIGITAL IN
COAX-1
COAX-2
COAX-3
COAX-4
OPTICAL-1
OPTICAL-2
OPTICAL-3
OPTICAL-4
NONE
3-7