Cin - Lexicon RV-8 User Manual

MODE ADJUST
PL +
MODE ADJUST %!PL + THXI
• Designed for playback of Dolby Surround-encoded sources.
• Decodes four channels from Dolby Surround-encoded sources.
• Uses a mono surround channel with a high-frequency rolloff
above 7kHz.
• Applies THX re-equalization to simulate high-frequency rolloffs
that occur in movie theaters. Most films are mixed for movie
theaters, and might sound too bright when played back in
home theaters without re-equalization.
• Applies THX timbre matching to minimize timbre differences
between the front and surround channels, which results in
smoother sound movements between them.
• Recommended for home theaters with THX-certified speaker
setups.
Option/ Default
Parameter Setting
RE-EQUALIZER ON
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
6-8
Possible
Settings
ON, OFF

CIN

R
MODE ADJUST DTS neo:6 R CIN
• Designed for playback of matrix-encoded digital stereo film
sources.
• Derives six channels when both side and rear speakers are
present (rear channels will be in parallel). Derives five channels
when only side or rear speakers are present. The subwoofer
channel is generated through bass management in the RV-8.
Option/
Parameter
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
Lexicon