Lexicon RV-8 User Manual page 60

RV-8
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
DIGITAL IN
COAX-1 to 4, OPTICAL-1 to 4, NONE
SETUP INPUTS DVD1 DIGITAL IN
Opens the DIGITAL IN menu shown above, which can be used to
assign a digital audio input connector for the selected input. The
RV-8 has eight configurable inputs, each of which can be assigned
to any of its eight digital audio input connectors.
Note:
The digital audio input connectors are compatible
with PCM (44.1kHz, 48kHz, 88.2kHz, and 96kHz),
Dolby Digital and DTS(-ES) sources. The digital audio
input connectors are not compatible with MPEG
(MP3) sources.
SETUP INPUT SETUP
INPUTS DVD1 DVD1
INPUTS
SPEAKERS DVD2
I/O CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER CD
TUNER SETUP TUNER
LOCK OPTIONS PHONO
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
5.1a 5.1a FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
ZONE2 ADVANCED
Please note the following:
• When no digital audio input connector is assigned, the RV-8 will
automatically set the MAIN ADVANCED menu INPUT SELECT
parameter to ANALOG.
• A digital audio input connector must be assigned when no
analog audio input connector is assigned. Refer to the next
page for information about assigning an analog audio input
connector.
SETUP
DVD1 DIGITAL IN
COAX-1
COAX-2
COAX-3
COAX-4
OPTICAL-1
OPTICAL-2
OPTICAL-3
OPTICAL-4
NONE
3-7