Lexicon RV-8 User Manual page 144

MODE ADJUST
The table below indicates the conditions in which Dolby Digital
Surround EX decoding is engaged.
• Dolby Digital Surround EX decoding is engaged when the EX
DECODING parameter is set to ON, or the EX DECODING
parameter is set to AUTO and a flagged 5.1-channel Dolby
Digital source recorded with Dolby Digital Surround EX is
detected.
• Dolby Digital Surround EX decoding is not engaged when the
EX DECODING parameter is set to OFF, or the EX DECODING
parameter is set to AUTO and a non-flagged 5.1-channel Dolby
Digital source recorded with or without Dolby Digital Surround
EX is detected.
• Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting and the speaker setup.
– The DOLBY DIGITAL EX listening mode is available when
Dolby Digital Surround EX decoding is engaged.
– The DOLBY DIGITAL listening mode is available when
Dolby Digital Surround EX decoding is not engaged.
– The DOLBY DIGITAL EX listening mode cannot be activated
unless both side and rear speakers are present.
Input
Source
Parameter
Setting
EX DECODING: AUTO
EX DECODING: ON
EX DECODING: OFF
6-20
5.1-Channel
Dolby Digital
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL
Note:
The RV-8 cannot automatically detect Dolby Digital
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged source does not
include information in the input signal that identifies
Dolby Digital Surround EX encoding.
5.1-Channel Dolby
Digital EX (Flagged)
DOLBY DIGITAL EX
DOLBY DIGITAL EX
DOLBY DIGITAL
Lexicon
5.1-Channel Dolby
Digital EX (Non-Flagged)
DOLBY DIGITAL
DOLBY DIGITAL EX
DOLBY DIGITAL