Lexicon RV-8 User Manual page 158

MODE ADJUST
BASS RT
Works with the MID RT and SIZE parameters to adjust the amount
of time required for low-frequency information to decay below
60dB in level. The BASS RT parameter setting should match the
MID RT parameter setting for more natural effects in smaller
listening spaces.
Setting the BASS RT, MID RT and SIZE parameters to a high
CAUTION
value may produce undesirable or damaging audio.
CALIBRATION
Opens the PANORAMA listening mode CALIBRATION menu, which
can be used to calibrate the PANORAMA listening mode. Refer to
page 6-12 for more information.
CENTER
MODE ADJUST (Listening Mode)
Controls the output level of the Main Zone audio output
connector labeled Center.
CENTER DEPTH
Adjusts the amount of processing applied to the center channel,
changing the perceived distance of the center speaker. Higher
settings increase and lower settings decrease the perceived
distance of the center speaker from the listening position.
CENTER MIX
Indicates the relative center channel level for downmixing. It is
recommended that you set this parameter to +0dB for film sources
and -5dB for music sources.
6-34
5ms to 48.6s
OFF, -30dB to +12dB
OUTPUT LEVELS CENTER
0 to 18
-25dB to +5dB
CNTR DLY SAMPLES
Controls the relative time offset of the center channel. It is
recommended that you set this parameter to +0 unless the center
channel is not properly timed and the value of the error is known.
COMPRESSION
Reduces wide volume level changes and increases dialog intelligi-
bility at lower listening levels for Dolby Digital input sources. When
set to ON, full compression is applied regardless of volume level.
When set to OFF, compression is not applied. It is recommended
that you set this parameter to AUTO or ON for Dolby Digital input
sources that are listened to at lower volume levels, especially for
nighttime viewing to avoid disturbing others.
CTR WIDTH
Adjusts the center image. When set to MIN, the center image is
heard from just the center speaker. When set to MAX, the center
image is heard from just the front left and right speakers as a
"phantom" center image. When set on the 1 to 6 scale, the center
image is heard in various combinations of the front and center
speakers.
CUSTOM
MODE ADJUST (Listening Mode)
Opens the CUSTOM menu, which can be used to compare custom
and factory-default versions of the selected listening mode and to
restore the factory default version of the selected listening mode.
Lexicon
-127 to +127
AUTO, ON, OFF
MIN, 1 to 6, MAX
CUSTOM