Assigning Audio And Video Input Connectors - Lexicon RV-5 User Manual

RV-5

ASSIGNING AUDIO and VIDEO INPUT CONNECTORS

The RV-5 has eight configurable inputs, each of which can be assigned to its ten digital audio, eight analog audio, the built-in tuner, the phono
input, two HDMI video, four composite video, four S-Video or three component video input connectors.
MAIN MENU
AUDIO CONTROLS
VIDEO CONTROLS
SETUP
The table below indicates the INPUT SETUP menu parameters that
can be used to assign audio and video input connectors.
Parameter Possible Settings
DIG AUDIO COAX-1 to 4, HDMI-1, HDMI-2, OPTICAL-1 to 4,
NONE
ANLG AUDIO ANALOG-1 to 6, 7.1 CHANNEL, TUNER, NONE
VIDEO IN COMPONENT-1 to 3, COMPOSITE-1 to 4,
HDMI-1, HDMI-2, S-VIDEO-1 to 4
Note:
The digital audio input connectors are compatible with PCM (44.1, 48,
88.2 and 96kHz), Dolby Digital and DTS (-ES) sources. The digital audio
input connectors are also compatible with MPEG or MP3 sources through
the DOCK input.
SETUP
INPUT SETUP: INPUT SETUP 1
DISPLAY SETUP
INPUTS INPUT:
INPUT SETUP
SPEAKERS NAME: ________
8-CH INPUT:
5.1+A/D
I/O CONFIG DIG AUDIO:
SURROUND CONFIG
DISPLAYS
ANLG AUDIO:
DOLBY SURR SETUP
VOLUME CONTROLS
DIG/ANLG AUTO:
SPEAKER/EQ SETUP
TRIGGER A/D SAMPLE RATE:
POWER ON SETTINGS
TUNER SETUP MODE FAMILY:
MODE:
DVD DIG AUDIO
NONE
DVD 1
HDMI 1
HDMI 2
HDMI 2
COAXIAL-1
NONE
HDMI 2 COAXIAL-2
ON
COAXIAL-3
48kHz
COAXIAL-4
STEREO
OPTICAL-1
2-CHANNEL
OPTICAL-2
OPTICAL-3
OPTICAL-4
DIG AUDIO
SETUP INPUT DIG AUDIO
Opens the DIG AUDIO menu, which is used to assign a digital audio
input connector for the selected input. The RV-5 has ten configurable
inputs, each of which can be assigned to any of its ten digital audio
input connectors.
Please note the following:
• When no digital audio input connector is assigned, the RV-5 will
automatically set the MAIN ADV menu INPUT SELECT
parameter to ANALOG (see page 3-15).
• A digital audio input connector must be assigned when no
analog audio input connector is assigned. Refer to the next page
for information about assigning an analog audio input
connector.
Setup
COAXIAL-1 to 4, HDMI-1, HDMI-2,
OPTICAL-1 to 4, NONE
3-7