Lexicon RV-8 User Manual page 102

RV-8
2 ST & (2) 5.1 ANLG
SETUP
I/O CONFIG
Configures the analog audio input connectors as two stereo and
two 5.1-channel connectors.
When the analog audio input connectors are configured as two
stereo and two 5.1-channel connectors:
• The connectors labeled 1 and 2 are configured as stereo
connectors.
• The connectors labeled 3, 4 and 5 are configured as a 5.1-
channel connector, and the connectors labeled 6, 7, and 8 are
configured as a second 5.1-channel connector. These connec-
tors are sent to the Main Zone speaker and audio output
connectors as indicated in the table to the right.
• Two-channel sources that were assigned to the stereo
connectors labeled 3, 4 and 5 are reassigned to the
5.1-channel connector labeled 3, 4 and 5. Two-channel
sources that were assigned to the stereo connectors labeled 6,
7 and 8 are reassigned to the 5.1-channel connector labeled 6,
7 and 8. The 5.1-channel connectors should only be used with
5.1-channel analog sources such as DVD-As and SACDs.
The 5.1-channel analog audio input connectors are sent to the
Main Zone speaker and analog audio output connectors as
shown in the table in the next column.
2 ST & (2) 5.1 ANLG
ANALOG INPUTS
Input Connector
(L)
(R)
(C)
(SUB)
(LS)
(RS)
SETUP
Output Connectors
Front L
Front R
Center
Sub
Side L and Rear L
Side R and Rear R
3-49