Lexicon RV-8 User Manual page 86

RV-8
Custom Speaker Setups
(continued from page 3-32)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
SIDE L/R
FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP SPEAKERS CUSTOM SETUP
Opens the SIDE L/R SPEAKERS menu shown above, for selecting a
crossover point for the Main Zone speaker and audio output
connectors labeled Side L/R. When set to FULL, the RV-8 sends a
full-range audio output signal to these connectors. Otherwise, the
RV-8 activates a crossover point at the selected setting. Choose the
setting closest to the low-frequency rating of associated
speakers.
When set to NONE, the RV-8 redirects side channel signals to the
Main Zone speaker and audio output connectors labeled Rear L/R.
If the CUSTOM SETUP menu REAR L/R parameter is also set to
NONE, the RV-8 redirects surround channel signals to the Main
Zone speaker and audio output connectors labeled Front L/R.
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP CUSTOM SETUP
SPEAKERS
SPEAKERS THX SETUP
I/O CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
40Hz
TUNER SETUP
LOCK OPTIONS
60Hz
M
SUB
40Hz 40Hz
SIDE L/R
CUSTOM SETUP
FRONT L/R 40Hz
CENTER 60Hz
SIDE L/R SIDE L/R 60Hz 60Hz
REAR L/R 60Hz
SUB 40Hz
R SR RR
THX ULTRA2 SUB
60Hz 60Hz
BGC
C
ASA APART
L SL RL
60Hz 60Hz
Note:
When the SIDE L/R parameter is set to NONE, Dolby
Digital Surround EX, THX Ultra2, THX Surround EX
and DTS-ES decoding are not available.
SIDE L/R SPEAKERS
FULL
30Hz
40Hz
50Hz
60Hz
OFF 70Hz
N/A 80Hz
THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE
SETUP
3-33