Lexicon RV-8 User Manual page 163

RV-8
Listening Mode Menu Option & Parameter Descriptions
RESET MODE
(continued)
3. Press the Menu arrow to close the CUSTOM menu and
return to the listening mode menu.
Note:
When the CUSTOM menu RESET MODE option is
selected to restore the factory-default version of the
selected listening mode, the corresponding TRIGGER
SETUP menu listening mode parameter is automati-
cally set to OFF.
ROLLOFF
Simulates the absorption of high frequencies in a real space. It
is recommended that you begin with a low setting to simulate
high-frequency absorbative spaces.
SIDE L/R
MODE ADJUST (Listening Mode)
Controls the output level of the Main Zone audio output
connector labeled Side L/R.
(continued from page 6-38)
500Hz to 20.0kHz, OFF
OFF, -30dB to +12dB
OUTPUT LEVELS SIDE L/R
SIZE
Adjusts the length of the listening space within a 4 to 20 or 30m
range (depending on the listening mode). Increase the size of the
space to increase the reverb effect.
Setting the BASS RT, MID RT and SIZE parameters to a high
CAUTION
value may produce undesirable or damaging audio.
SOUND STAGE
Dynamically controls the relative balance of the Main Zone audio
output connectors. When set to FRONT, Side L/R and Rear L/R
output levels are attenuated by 6dB, shifting the perceived balance
of the sound field to the front of the listening space. When set to
NEUTRAL, Side L/R and Rear L/R output levels are slightly
attenuated by 3dB, shifting the perceived balance of the sound
field to the center of the listening space. When set to REAR, Side
L/R and Rear L/R output levels are not attenuated, preserving the
intended balance of the sound field.
SOURCE
Refer to page 6-13.
SPEAKER ANGLE
Refer to page 6-13.
MODE ADJUST
4m to 20m or 30m
FRONT, NEUTRAL, REAR
RIGHT, LEFT & RIGHT, LEFT
10deg to 90deg
6-39