Lexicon RV-8 User Manual page 22

Basic Operation
Front-Panel Overview
(continued from page 2-3)
4. Main Zone Input Selection Buttons
Select the input in the Main Zone. When an input is selected,
a blue LED lights on the corresponding input selection button.
When the Main Zone is deactivated, pressing a Main Zone
input selection button activates the Main Zone and selects the
corresponding input. Zone 2 and Zone 3 remain deactivated
until a Zone 2 or Zone 3 input is selected.
5. Zone 2 Input Selection Buttons
Select the input in Zone 2. When an input is selected, an amber
LED lights on the corresponding input selection button. When
Zone 2 is deactivated, pressing a Zone 2 input selection button
activates Zone 2 and selects the corresponding input. The
Main Zone and Zone 3 remain deactivated until a Main Zone
or Zone 3 input is selected.
6. Zone 3 Input Selection Buttons
Select the input in Zone 3. When an input is selected, a
red LED lights on the corresponding input selection button.
When Zone 3 is deactivated, pressing a Zone 3 input selection
button activates Zone 3 and selects the corresponding input.
The Main Zone and Zone 2 remain deactivated until a Main
Zone or Zone 2 input is selected.
7. Tuner Selection Buttons
The tuner selection buttons allow for direct entry of station fre-
quencies, selection of AM or FM broadcast band, and the sav-
ing/recalling of presets. See page 2-10 for additional tuner
information.
2-4
8. Standby Button
Toggles the RV-8 between on and standby. When the RV-8 is
powered on, pressing this button places the RV-8 into standby
and lights the red LED on this button. Power is still supplied to
the RV-8 when it is in standby. When the RV-8 is in standby,
pressing this button turns the unit on and activates all zones
that were active in the previous operating session.
9. Channel Status LEDs
Each amplifier channel has a blue LED on the front-panel
that is illuminated when the unit is on. The LED turns off
to indicate when there is a problem with the corresponding
channel. See pages 2-12 and 2-13 for additional information.
10.Mode and Buttons
Scroll to the previous ( ) and the next ( ) available listening
mode. Scrolling occurs in the order shown on the MODE
ADJUST menu. Refer to the Listening Mode Activation section
that begins on page 6-2 for more information.
11.Mute Button
Mutes Main Zone volume level and restores Main Zone volume
to its original level. Pressing the Mute button the first time
lowers Main Zone volume level. The message "MUTE ON"
appears in the on-screen and front-panel displays. Pressing the
Mute button again restores Main Zone volume to its original
level. See page 3-57 for information about using the MUTE
LEVEL parameter to set mute levels.
Lexicon