(Continued From - Lexicon RV-8 User Manual

SETUP
Assigning Audio & Video Input Connectors
MAIN MENU SETUP
MODE ADJUST INPUTS INPUTS
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
ANALOG IN
ANALOG-1 to 8, 5.1 ANLG (3-5) or (6-8),
PHONO, TUNER, NONE
SETUP INPUTS DVD1 ANALOG IN
Opens the ANALOG IN menu shown above, which can be used to
assign an analog audio input connector for the selected input. The
RV-8 has eight configurable inputs, in addition to the built-in tuner
and the phono connector, which can be assigned to any of its eight
analog audio input connectors.
The appearance of the ANALOG IN menu depends on the
configuration of the analog audio input connectors.
• The ANALOG IN menu labeled A (above) appears when the I/O
CONFIG menu 8 STEREO INPUTS option (page 3-48) is select-
ed.
• The ANALOG IN menu labeled B (above) appears when the
I/O CONFIG menu 5 ST & (1) 5.1 ANLG option is selected.
3-8
(continued from page 3-7)
DVD1 INPUT SETUP
INPUT SETUP
DVD1 DVD1 NAME
DIGITAL IN
DVD2
SAT ANALOG IN ANALOG IN
VCR ANLG IN LVL
TV VIDEO IN
CD COMPONENT IN
TUNER 2-CH
PHONO %!D
DTS-ES DTS-ES L7
5.1a
MAIN ADVANCED
ZONE2 IN
ZONE2 ADVANCED
DVD1 ANALOG IN
DVD1 ANALOG-1
COAX-1
ANALOG-2
NONE NONE ANALOG-3
AUTO ANALOG-4
S-VIDEO-1 ANALOG-5
1 ANALOG-6
L7 FILM ANALOG-7
5.1 L7 FILM ANALOG-8
FILM
PHONO
5.1a FILM TUNER
NONE
DIGITAL
A
• The ANALOG IN menu labeled C (above) appears when the I/O
CONFIG menu 2 ST & (2) 5.1 ANLG option is selected.
Please note the following:
• When no analog audio input connector is assigned, the RV-8
will automatically set the MAIN ADVANCED menu INPUT
SELECT parameter to DIGITAL (page 3-18).
• An analog audio input connector must be assigned when no
digital audio input connector is assigned. Refer to the previous
page for information about assigning a digital audio input
connector.
• The PHONO input corresponds to the built-in phono con-
nector.
• The TUNER input corresponds with the internal AM/FM radio
tuner.
DVD1 ANALOG IN DVD1 ANALOG IN
ANALOG-1 ANALOG-1
ANALOG-2 ANALOG-2
ANALOG-3 5.1 ANLG (3-5)
ANALOG-4 5.1 ANLG (6-8)
ANALOG-5 PHONO
5.1 ANLG (6-8) TUNER
PHONO NONE
TUNER
NONE
C
B
Lexicon