Lexicon RV-8 User Manual page 93

SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
MEASURING SPEAKER DISTANCES
SETUP SPEAKERS SPEAKER DISTANCES
Selecting the SPEAKER SETUP menu SPEAKER DISTANCES option
opens the SPEAKER DISTANCES menu shown above, which can be
used to set the distance between the listening position and the
speakers connected to the Main Zone speaker and audio output
connectors. The RV-8 features a speaker distance control that
allows distances to be entered for each speaker. This helps ensure
accurate signal arrival time at the listening position, but is not a
substitute for proper speaker placement.
To determine the appropriate setting for each speaker, measure the
distance between the listening position and the front baffle of the
speaker. Then set the corresponding SPEAKER DISTANCES menu
parameter to the closest available setting.
3-40
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS
SPEAKERS THX SETUP
I/O CONFIG SPEAKER DISTANCES SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
0.0 ft
TUNER SETUP
LOCK OPTIONS
0.0 ft
M
SUB
0.0 ft 0.0 ft
SPEAKER DISTANCES
FRONT LEFT 0.0 ft
CENTER 0.0 ft
FRONT RIGHT 0.0 ft
SIDE RIGHT 0.0 ft
REAR RIGHT 0.0 ft
R SR RR
REAR LEFT 0.0 ft
0.0 ft 0.0 ft
SIDE LEFT 0.0 ft
C
SUB 0.0 ft
UNITS FEET
L SL RL
0.0 ft 0.0 ft
Default
Parameter Setting
FRONT LEFT 0.0 ft
CENTER 0.0 ft
FRONT RIGHT 0.0 ft
SIDE RIGHT 0.0 ft
REAR RIGHT 0.0 ft
REAR LEFT 0.0 ft
SIDE LEFT 0.0 ft
SUB 0.0 ft
UNITS FEET
Lexicon
0.0 to 30.0ft
Possible
Settings
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
0 to 30 ft or 0 to 12 m
FEET, METERS