Lexicon RV-8 User Manual page 72

RV-8
MAIN ADVANCED
(continued from page 3-18)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be
shown as an example throughout this section. Whenever it appears, any other INPUT
SETUP menu can be substituted. Likewise, whenever the DVD1 input appears as a step
in a menu path, any other input can be substituted.
INPUT SELECT
SETUP INPUTS DVD1 MAIN ADVANCED
Controls the interaction of the digital and analog audio input
connectors assigned for the selected Main Zone input. The INPUT
SETUP menu can be used to assign one digital and one analog
audio input connector for the selected input. Refer to page 3-8 for
more information.
The table shown on the next page describes INPUT SELECT
parameter settings.
SETUP INPUT SETUP
INPUTS INPUTS DVD1 DVD1
SPEAKERS DVD2
I/O CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER CD
TUNER SETUP TUNER
LOCK OPTIONS PHONO
DIGITAL, ANALOG, AUTO
INPUT SELECT
DVD1 INPUT SETUP DVD1 MAIN ADV
NAME DVD1 INPUT SELECT INPUT SELECT
DIGITAL IN COAX-1 ANALOG BYPASS
ANALOG IN NONE S-VIDEO 16:9
ANLG IN LVL AUTO S-VIDEO OSD 4:3
VIDEO IN S-VIDEO-1 COMPONENT OSD
COMPONENT IN 1 LEGACY VIDEO
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
5.1a 5.1a FILM
MAIN ADVANCED
MAIN ADVANCED
ZONE2 IN DIGITAL
ZONE2 ADVANCED
Note:
When the INPUT SELECT parameter is set to AUTO,
the RV-8 will not select the assigned analog audio
input connector when a valid digital audio input
source is present. Some DVD and CD players output
digital signals (data) when the player is paused or
stopped or when the player is powered on and the
disc drawer is empty. When this occurs, the RV-8
automatically selects the assigned digital audio input
connector.
SETUP
DIGITAL
ANALOG
DIGITAL DIGITAL
AUTO
OFF
AUTO
ON
ON
A
3-19