Tuner Setup - Lexicon RV-8 User Manual

SETUP
MAIN MENU SETUP
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER

TUNER SETUP

TUNER SETUP
LOCK OPTIONS
TUNER SETUP
SETUP
TUNER SETUP
Selecting the SETUP menu TUNER option opens the TUNER SETUP
menu shown above, which can be used to configure the AM/FM
radio tuner.
Default
Parameter Setting
REGION USA
SCAN SENS LOW
AUTOLOAD N/A
CLEAR ALL N/A
3-60
TUNER SETUP
REGION USA
REGION USA
SCAN SENS LOW
AUTOLOAD
CLEAR ALL
Possible
Settings
USA, EUROPE, JAPAN, E. EUR
LOW, MED, HIGH
N/A
N/A
USA
EUROPE
JAPAN
E. EUR
REGION
SETUP REGION
TUNER SETUP
Sets the tuner region. The four regions are USA, EUROPE, JAPAN
and E. EUR. The table on the next page lists the band limits and
increments for these regions.
Note:
The tuner user interface will not allow illegal frequen-
cies to be entered. It will always set at the closest
valid frequency. For example, if the RV-8 has USA set
as the current region, entering 107.8MHz will result
in 107.9MHz being the actual tuner frequency. If the
value is less than the lowest frequency, it will set it to
LO LIMIT for the appropriate region. Likewise, if the
dialed value is larger than the highest allowed
frequency, it will actually set it to the HI LIMIT for the
appropriate region.
Lexicon
USA, EUROPE, JAPAN, E. EUR