Lexicon RV-8 User Manual page 143

RV-8
MUSIC
MODE ADJUST THXI MUSIC
• Designed for playback of 5.1-channel Dolby Digital music
sources.
• The 5.1 THX MUSIC listening mode cannot be activated unless
side and rear speakers are present.
• ASA processing is applied to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-37 for more
information.
• Recommended for home theaters with THX-certified speaker
setups.
Option/ Default
Parameter Setting
COMPRESSION OFF
LFE MIX +0.0dB
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
Note:
The 5.1 THX MUSIC listening mode can only be
activated with the front-panel or remote control
Mode and buttons.
Possible
Settings
AUTO, ON, OFF
-10.0dB to +0.0dB
DIGITAL & DIGITAL EX
MODE ADJUST %!DIGITAL OR %!DIGITAL EX
• Designed for playback of 5.1-channel Dolby Digital sources.
The DOLBY DIGITAL listening mode is recommended for Dolby
Digital sources recorded with Dolby Digital Surround EX. This
listening mode can also be used with 5.1-channel Dolby Digital
sources with mixed results.
• Listening mode name differs depending on the encoding
present in the input source, the EX DECODING parameter
setting and the speaker setup. The table on the next page
indicates the conditions in which Dolby Digital Surround EX
decoding is engaged.
• Decodes 5.1 discrete channels from 5.1-channel Dolby Digital
sources. The five main channels are full-frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.
• When the DOLBY DIGITAL EX listening mode is activated,
matrix decoding derives a surround back channel from the
other surround channels.
Option/ Default
Parameter Setting
EX DECODING AUTO
COMPRESSION OFF
LFE MIX +0.0dB
OUTPUT LEVELS Refer to page 6-37
CUSTOM Refer to page 6-34
Listening mode menu option and parameter descriptions begin on page 6-33.
MODE ADJUST
Possible
Settings
AUTO, ON, OFF
AUTO, ON, OFF
-10.0dB to +0.0dB
6-19