Lexicon RV-8 User Manual page 26

Lexicon rv-8: user guide
Hide thumbs Also See for RV-8:
Table of Contents

Advertisement

Basic Operation
Rear-Panel Overview
(continued from page 2-7)
6. Zone 2 Video Output Connectors
Provide video output in Zone 2. Two composite video connec-
tors and two S-video connectors are available. These connec-
tors can also be used to connect to a video recording device.
Note:
Composite video output connectors are available
when a composite or S-video source is present.
S-video output connectors are available when an
S-video source is present.
Component video output connectors are available
when a component, composite or S-video source
is present.
7. Zone 2 Analog Audio Output Connectors
Provide analog audio output in Zone 2. Two pairs of connec-
tors, one labeled "Fix" and the other labeled "Var"are avail-
able. These connectors can also be used to connect a record-
ing device. For recording, use the output connector labeled
"Fix," which provides a fixed output level of +0dB. If output
level adjustment is needed, use the output labeled "Var" and
adjust the Zone 2 volume.
2-8
Note:
When using an analog input source, the Zone 2 and
Zone 3 Audio Outputs are approximately 2dB lower
than the Main Audio Outputs labeled Front L/R.
When using a digital input source, the Zone 2 Audio
Outputs are approximately 6dB higher than the Main
Audio Outputs labeled Front L/R. This is to accom-
modate THX level requirements.
8. Tuner Antenna Connectors
Provide antenna connections for the AM/FM stereo radio tuner.
Two antennas are included with the RV-8.
9. Digital Audio Input Connectors (S/PDIF)
Provide digital audio input in the Main Zone or Zone 2. Four
S/PDIF coaxial and four S/PDIF optical (Toslink) input connec-
tors are available. These connectors are compatible with PCM
(44.1, 48, 88.2 and 96kHz), Dolby Digital and DTS(-ES)
sources. These connectors are not compatible with MPEG (MP3)
sources.
10.Microphone Input Connectors
These connectors are reserved for future upgrades.
11.Phono Input Connectors
Provide a phono level input, which can be assigned to any of
the eight RV-8 inputs. A 2-channel analog bypass path is avail-
able
Lexicon

Advertisement

Chapters

Table of Contents
loading

Table of Contents