Lexicon RV-8 User Manual page 78

RV-8
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
ZONE2 IN
SETUP INPUTS DVD1 ZONE2 IN
Controls the interaction of the digital and analog audio input
connectors assigned to the selected Zone 2 input. The INPUT
SETUP menu can be used to assign one digital and one analog
input connector for the selected input. See pages 3-7 and 3-8 for
more information.
The table shown on the next page describes ZONE2 IN param-
eter settings.
SETUP INPUT SETUP
INPUTS INPUTS DVD1 DVD1
SPEAKERS DVD2
I/O CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER CD
TUNER SETUP TUNER
LOCK OPTIONS PHONO
DIGITAL, ANLG, DMIX
DVD1 INPUT SETUP
NAME DVD1
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1
COMPONENT IN 1
2-CH L7 FILM
%!D 5.1 L7 FILM
DTS-ES DTS-ES L7 FILM
5.1a 5.1a FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
ZONE2 IN DMIX
ZONE2 ADVANCED
When using DTS-encoded discs, it is recommended that you
set the ZONE2 IN parameter to DMIX. When set to DIGITAL,
the unit recognizes DTS-encoded discs as audio signals
(not data signals) and outputs loud digital noise from the
ZONE2 AUDIO OUTPUTS and the ZONE2 DIGITAL AUDIO
OUTPUTS. For maximum flexibility with Dolby Digital and DTS
(-ES) sources, it is recommended that you select a DIGITAL IN
CAUTION
connector for the Main Zone and to set the ZONE2 IN param-
eter to ANLG. Connect the digital and analog outputs on the
DVD player to the corresponding digital and analog inputs on
the RV-8. The unit will use the digital connector for the Main
Zone, and the analog connectors for Zone 2.
SETUP
DIGITAL
ANLG
DMIX
3-25