Lexicon RV-8 User Manual page 65

SETUP
Assigning Audio & Video Input Connectors
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
The DVD1 INPUT SETUP menu is shown here as an example, and will continue to be shown as an example throughout this section. Whenever it appears, any other INPUT SETUP menu
can be substituted. Likewise, whenever the DVD1 input appears as a step in a menu path, any other input can be substituted.
COMPONENT IN
SETUP INPUTS DVD1 COMPONENT IN
Opens the COMPONENT menu shown above, which can be used
to assign a component video input connector for the selected
input. The RV-8 has eight configurable inputs, each of which can
be assigned to any of its three component video input connectors.
Alternatively, COMPONENT IN can be assigned to VIDEO. This will
cause the composite or S-video signal selected for the VIDEO IN
parameter to be converted to component output. The NONE
setting will shut off the component output.
3-12
(continued from page 3-11)
SETUP
INPUTS INPUTS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
COMPONENT 1 to 3, VIDEO, NONE
INPUT SETUP DVD1 INPUT SETUP
DVD1 DVD1 NAME
DVD2 DIGITAL IN
SAT ANALOG IN
VCR ANLG IN LVL
TV VIDEO IN
CD COMPONENT IN COMPONENT IN
TUNER 2-CH
PHONO %!D
DTS-ES
5.1a
MAIN ADVANCED
ZONE2 IN
ZONE2 ADVANCED
Note:
When the component is set to NONE, black and blue
lines will appear on the screen if the monitor does not
have auto-sense.
DVD1 COMPONENT
DVD1 COMPONENT 1
COAX-1 COMPONENT 2
NONE COMPONENT 3
AUTO VIDEO
S-VIDEO-1 NONE
1 1
L7 FILM
5.1 L7 FILM
DTS-ES L7 FILM
5.1a FILM
DIGITAL
Lexicon