Lexicon RV-8 User Manual page 87

SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER PRESETS
SETUP
REAR L/R
FULL, 30Hz to 120Hz, THX 80Hz, NONE
SETUP SPEAKERS CUSTOM SETUP
Opens the REAR L/R SPEAKERS menu shown above, for selecting a
crossover point for the Main Zone speaker and audio output
connectors labeled Rear L/R. When set to FULL, the RV-8 sends a
full-range audio output signal to these connectors. Otherwise, the
RV-8 activates a crossover point at the selected setting. Choose the
setting closest to the low-frequency rating of associated
speakers.
When set to NONE, the RV-8 redirects rear channel signals to the
Main Zone speaker and audio output connectors labeled Side L/R.
If the CUSTOM SETUP menu SIDE L/R parameter is also set to
NONE, the RV-8 redirects surround channel signals to the Main
Zone speaker and audio output connectors labeled Front L/R.
3-34
SETUP
INPUTS
SPEAKERS
SPEAKERS
I/O CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
REAR L/R
SPEAKER SETUP CUSTOM SETUP
CUSTOM SETUP CUSTOM SETUP FRONT L/R
THX SETUP CENTER
SPEAKER DISTANCES SIDE L/R
LEVELS CALIBRATION REAR L/R REAR L/R
SUB
R SR RR
THX ULTRA2 SUB
40Hz 60Hz 60Hz
BGC
C
ASA
60Hz
M
L SL RL
SUB
40Hz 40Hz 60Hz 60Hz
Note:
When the REAR L/R parameter is set to NONE:
• Dolby Digital Surround EX, THX Ultra2, THX
Surround EX and DTS-ES decoding are not
available.
• The ASA parameter is not available.
REAR L/R SPEAKERS
40Hz FULL
60Hz 30Hz
60Hz 40Hz
60Hz 60Hz 50Hz
40Hz 60Hz
OFF 70Hz
N/A 80Hz
APART THX 80Hz
90Hz
100Hz
110Hz
120Hz
NONE
Lexicon