Lexicon RV-8 User Manual page 92

RV-8
THX Speaker Setups
(continued from page 3-38)
MAIN MENU SETUP
MODE ADJUST INPUTS
SPEAKERS
AUDIO CONTROLS SPEAKERS
TUNER PRESETS I/O CONFIG
DISPLAYS
SETUP
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
REAR L/R
SETUP SPEAKERS THX SETUP
Opens the THX REAR SPEAKERS menu shown above, which can be
used to activate and deactivate the Main Zone speaker and audio
output connectors labeled Rear L/R. When set to THX 80Hz, the
RV-8 activates these connectors and configures all Main Zone audio
output connectors for a 7.1-channel THX speaker setup. When set
to NONE, the RV-8 deactivates these connectors and configures the
other Main Zone speaker and audio output connectors for a 5.1-
channel THX speaker setup.
Note:
When the REAR L/R parameter is set to NONE:
• Dolby Digital Surround EX, THX Ultra2, THX
Surround EX and DTS-ES decoding are not
available.
• The ASA parameter is not available.
SPEAKER SETUP
CUSTOM SETUP
THX SETUP
THX SETUP
SPEAKER DISTANCES
LEVELS CALIBRATION
R SR RR
40Hz 60Hz
C
60Hz
M
L SL RL
SUB
40Hz 40Hz 60Hz
THX 80Hz, NONE
REAR L/R
THX SPEAKER SETUP
!CAUTION!
PRESSING THE V
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
SPEAKER
60Hz
CONFIGURATION
60Hz
The THX SETUP menu THX ULTRA2 SUB, BGC and ASA parameters
are identical to the CUSTOM SETUP menu THX ULTRA2 SUB,
BGC and ASA parameters. When one of these parameter settings
is adjusted on one menu, it is automatically adjusted on the other
menu at the same time. Refer to pages 3-36 and 3-37 for these
parameter descriptions.
THX SETUP THX REAR SPEAKERS
FRONT L/R* THX 80Hz THX 80Hz
CENTER* THX 80Hz NONE
SIDE L/R* THX 80Hz
REAR L/R REAR L/R THX 80Hz THX 80Hz
SUB* THX 80Hz
THX ULTRA2 SUB OFF
BGC N/A
ASA APART
* These parameters cannot be
adjusted.
SETUP
3-39