Lexicon RV-8 User Manual page 52

Basic Operation
STATUS Menu Parameter Descriptions
Possible settings for Dolby Digital input sources include 3/2.1, 3/2,
3/1, 2/2, 2/1, 2/0 and 1/0. Possible settings for DTS(-ES) input
sources include 3/3.1 and 3/2.1.
DIALOG OFFSET
Indicates the dialog normalization value applied to the input signal.
Dolby Digital input sources reproduce dialog at 27 decibels below
full-scale (-27dBFS). When the dialog normalization value of the
incoming signal is higher or lower, the DIALOG OFFSET parameter
indicates the amount of adjustment the RV-8 makes to normalize
dialog to -27dBFS.
ES ENCODING
Indicates whether or not a DTS-ES encoded source is detected.
When the parameter setting is DISCRETE, a discrete 6.1-channel
DTS-ES source is detected. When the parameter setting is MATRIX,
a 5.1-channel DTS-ES source with a surround-encoded back chan-
nel is detected. When the parameter setting is NONE, a standard
DTS source with no DTS-ES encoding is detected.
EX ENCODING
Indicates whether or not a Dolby Digital Surround EX encoded
source is detected. When the parameter setting is MATRIX, a
5.1-channel Dolby Digital source recorded with Dolby Digital
Surround EX is detected. When the parameter setting is NONE, a
standard 5.1-channel Dolby Digital source recorded without Dolby
Digital Surround EX encoding is detected. The RV-8 cannot auto-
matically detect Dolby Digital Surround EX encoding in non-
flagged input sources. See page 6-19 for more information.
2-34
(continued from page 2-33)
-27 to +4dB
DISCRETE, MATRIX, OFF
MATRIX, NONE
INPUT
Indicates the selected input (e.g., DVD1).
INPUT TYPE
Indicates the input source that is present. When ANLG is displayed,
a 2-channel analog audio source is present and the MAIN
ADVANCED menu ANALOG BYPASS parameter is set to OFF. When
BYPASS is displayed, an analog audio source is present and the
ANALOG BYPASS parameter is set to ON. When PCM is displayed,
a 2-channel digital audio source is present. When --- is displayed,
an unknown type of digital audio source is present.
MIX ROOM
Indicates the size of the mixing room that was used during the
mixing process. When the parameter setting is LARGE, it is
recommended to set the RE-EQUALIZATION parameter to ON for
THX listening modes.
MODE
Indicates the activated listening mode (e.g., L7 FILM).
SAMPLE RATE
Indicates the sample rate of the input source that is present.
Lexicon
ANLG, BYPASS, PCM, ---
SMALL, LARGE
44.1kHz, 48kHz, 88.2kHz, 96kHz