Status Menus - Lexicon RV-8 User Manual

RV-8
Zone 3 Two-Line Status
The Zone 3 two-line status shown at the right
indicates the current input, source type and
volume level selected in Zone 3. It appears in
the on-screen and front-panel displays when the RV-8 detects a
Zone 3 change.
Tuner Status
The Tuner status shown at the right indicates
the current frequency, band, listening mode
and volume level. It takes the place of the
two-line status display for inputs using the
built in tuner.

STATUS MENUS

Pressing the remote control STAT2 button opens the STATUS menu
for the current input source of the Main Zone, which contains
parameters that provide information about the current input
source and listening mode. STATUS menus are available for 2-chan-
nel, Dolby Digital, DTS(-ES) and 5.1 analog input sources.
Unlike most other menus, STATUS menus cannot be opened
through the selection of menu options. Rather, the remote control
STAT2 button must be pressed.
To open and navigate the STATUS menu for the current input
source:
1. Under Zone 2 page 2, press "STAT2." The first page of the
STATUS menu for the current input source will appear in the
on-screen and front-panel displays.
DVD1 %!ANLG VOL
ZONE3 -34dB
3. When the desired STATUS menu page has been opened, press
TUNER 90. 90.9 FM
MUSIC -34dB
4. Press the STAT2 button or the Menu
STATUS menu descriptions begin on the next page. The table
beneath each description lists the default and possible settings for
each parameter. STATUS menu parameter descriptions begin on
page 2-33. STATUS menu level meters are described on page 2-35.
If the STATUS menu includes a second page, the PG1 indicator
appears in the top-right corner of the menu. Press the STAT2
button to open the second page. If the STATUS menu does not
include a second page, pressing the STAT2 button closes the
menu. If this occurs, begin again with step 1.
the remote control Menu
and downward through the complete list of parameters avail-
able on the current page.
Note:
STATUS menu parameters provide information about
the current input source and listening mode. These
parameters cannot be adjusted.
STATUS menu. If the second page of the STATUS menu opens,
press the STAT2 button or the Menu
the STATUS menu.
Basic Operation
and arrows to scroll upward
arrow to close the
arrow again to close
2-29