Lexicon RV-8 User Manual page 45

RV-8
33
35
36
38
BUTTON
33
39
34
35
MODE
36
34
37
35
38
37
39
ZONE3 PAGE1 ZONE3 PAGE2
When a menu is open, closes the menu and, in
most cases, opens the previous menu.
Subsequent presses continue to close the cur-
rent menu and open the previous menu until
the MAIN MENU is closed. When no menus are
open, this button performs no function.
When a menu is open, closes the menu struc-
ture. When no menus are open, shows the
two-line status.
Numbers 0 to 9 are used to enter the
frequency of radio stations or to save/load
presets when the RV-8's built-in tuner is the
currently selected input.
If the RV-8 built-in tuner is the currently select-
ed input, toggles between AM/FM frequency
bands.
If the RV-8's built-in tuner is the currently
selected input, pressing this button saves
the currently selected tuner frequency into
a preset slot. Also use this button when
programming the remote. See page C-4 for
additional information.
Macro Buttons: M1 is for Macro 1, M2 is for Macro 2 and M3 is for Macro 3. See page C-10
for additional infomation on how to use and program macros.
Activates the remote control backlight that illuminates the buttons and LCD screen for easier
visibility.
Basic Operation
DVD1 PAGE1 DVD1 PAGE2
Navigates to the left in the RT-10 menu
structure.
Selects the highlighted RT-10 menu
item.
Direct RT-10 title, chapter, group or track
number selection.
To enter values 10 and above on the RT-
10. Press once for numbers in the teens,
twice for numbers in the twenties, and so
on. Then press a number button (0 to 9)
to enter a second digit.
Deletes entries when RT-10 search modes
and certain playback modes are activated.
2-27