Lexicon RV-8 User Manual page 147

RV-8
DECODING
The table below indicates the conditions in which DTS-ES
decoding is engaged.
• DTS-ES decoding is engaged when the ES DECODING
parameter is set to ON, or the ES DECODING parameter is set
to AUTO and a 5.1-channel matrix-encoded or 6.1-channel
discrete-encoded DTS-ES source is detected.
• DTS-ES decoding is not engaged when the ES DECODING
parameter is set to OFF, or the ES DECODING parameter is set
to AUTO and a 5.1-channel DTS source is detected.
• Listening mode names differ depending on the encoding
present in the input source, the ES DECODING parameter
setting and the speaker setup.
– DTS-ES listening modes are available when DTS-ES decod-
ing is engaged.
– DTS listening modes are available when DTS-ESdecoding is
not engaged.
– DTS-ES listening modes cannot be activated unless both
side and rear speakers are present.
Input
Source
Parameter
Setting
ES DECODING: AUTO
ES DECODING: ON
ES DECODING: OFF
5.1-Channel DTS
DTS
DTS-ES
DTS
Note:
The table below is not applicable to the DTS-ES THX,
DTS THX ULTRA2, and DTS THX MUSIC listening
modes.
5.1-Channel
Matrix-Encoded DTS-ES
DTS-ES
DTS-ES
DTS
MODE ADJUST
6.1-Channel
Discrete-Encoded DTS-ES
DTS-ES
DTS-ES
DTS
6-23