Lexicon RV-8 User Manual page 97

SETUP
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
TUNER
SETUP
EXTERNAL NOISE TEST
SETUP SPEAKERS LEVELS CALIBRATION
Opens the SPEAKER LEVEL ADJUST menu shown above, which can
be used to adjust output levels while the external noise test is
conducted. The external noise test requires an external calibration
source, such as an audio calibration disc.
When the external noise test is conducted, the RV-8 activates a
listening mode based on the Main Zone input source that is pres-
ent. The table in the next column indicates the listening mode that
is activated for each input source. When a listening mode is acti-
vated during the external noise test, it retains its factory-default
settings, ignoring custom settings that might have been made on
the corresponding listening mode menu. Custom settings will be
restored after the external noise test is complete.
3-44
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS
SPEAKERS THX SETUP
I/O CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
TUNER SETUP
LOCK OPTIONS
0.0dB
EXTERNAL NOISE TEST
LEVELS CALIBRATION
INTERNAL NOISE TEST
EXTERNAL NOISE TEST
EXTERNAL NOISE TEST
BASS PEAK LIMITER
R SR RR
0.0dB 0.0dB 0.0dB
C
0.0dB
M
L SL RL
SUB
0.0dB 0.0dB 0.0dB
2-Channel
Sources
DOLBY PLII MOVIE
* These listening mode names differ depending on the input source, the speaker
configuration and certain parameter settings.
SPEAKER LEVEL ADJUST
FRONT LEFT +0.0dB
CENTER +0.0dB
FRONT RIGHT +0.0dB
SIDE RIGHT +0.0dB
REAR RIGHT +0.0dB
REAR LEFT +0.0dB
SIDE LEFT +0.0dB
SUB +0.0dB
Dolby Digital DTS(-ES)
Sources Sources
DOLBY DIGITAL* DTS(-ES)*
Lexicon