75: Serial Out Parity; 98: Restore Factory Defaults, Print Self-Test, Or Restore Previously Defined Settings; 99: Save Configuration In Nonvolatile Memory; Save Configuration In Nonvolatile Memory - Intermec EasyCoder 4630 User Manual

4630 and 4830 Coax/Twinax Interface Card User's Manual

75: Serial Out Parity

Purpose: Selects the parity of a data stream sent from the
interface card to the printer. This setting becomes
active the next time the printer is turned on.
Syntax: Z75,n
n =
0 None (default)
1 Odd
2 Even
Example: &%Z75,2
Sets the outgoing parity on the interface card to even.

98: Restore Factory Defaults, Print Self-Test, or Restore

Previously Defined Settings
Purpose: Restores the factory default configuration selections,
prints the active configuration settings, or restores the
nonvolatile memory settings.
Z98,n
Syntax:
n =
0 Restores the factory setup
1 Prints the active configuration settings
2 Restores the settings stored in nonvolatile
memory
Example: &%Z98,1
Prints the active configuration settings.
Notes: &%Z98,2 placed at the end of the file restores the
settings in nonvolatile memory.

99: Save Configuration in Nonvolatile Memory

Purpose: Saves the active setup in nonvolatile memory on the
interface card. This setup takes effect the next time the
printer is turned on.
Syntax: Z99,0
Example: &%Z99,0
1-18