Changing The Setup; Accessing Rfid Setup Via Tcp/Ip - Intermec EasyCoder PM4i User Manual

Changing the Setup

All RFID setup values can be changed directly on the printer's console
(except VOIDTEXT, which is a string and cannot be entered on the
numeric keypad). The following example sets TAGADJUST to 50 dots,
retries to 3 labels and VOIDTEXT to "Bad label".
Example

Accessing RFID setup via TCP/IP

The printer's RFID setup parameters can also be changed via a TCP/
IP communication channel. Acquire the printer's IP address from the
console (Setup > Network > IP Address), open your web browser and
enter the number into the address field. This opens up the printer's home
page.
In the main menu, select Configuration. This brings up a list of folders
on the left-hand side of the window. Select Printer > RFID.
RFID Kit (Gen 2, 869/915 MHz) User's Guide
10 SETUP "RFID,TAGADJUST,50"
20 SETUP "RFID,RETRIES,3"
30 SETUP "RFID,VOIDTEXT,Bad label"